“Coup de Coeur” Made in France by Yves Jego

Aucune description alternative pour cette imageYves JEGO is an attentive observer of our development and we thank him for this extremely sympathetic presentation! We also underline his lucidity on the heterogeneity of the offer on the market and his support for our long term work on the standards!

However, we must point out that 3M is not our industrial partner on the subject of biocide adhesive… But we are extremely well supported in this area!
#metalskin #focus #fabriqueenfrance #innovation #performance #quality #norme #adhesif

MetalSkin®, a disinfection solution for buses – Mobilités Magazine

14/12/2021 – At Roissy Charles Gaulle airport, an experiment was conducted in November 2021 by the companies UUDS Aero, Transdev and Metalskin Technologies in a bus.

This experiment aimed to demonstrate the effectiveness of the combination of the use of MetalSkin® biocidal coating on contact points and periodic disinfection.

According to the results announced, the conclusions of this experiment are extremely positive and conclusive: the surfaces remained very slightly contaminated throughout the duration of the study.

This seems to provide public transport with an innovative solution to effectively and permanently protect the users who use it daily. In this sense, it is a real revolution in transport hygiene.

The microbial loads measured during 21 days on the contact points equipped with MetalSkin® remained constantly below the significance threshold (50), and often equal to zero.

In other words, between two disinfections (every three days), the elements equipped with MetalSkin® presented an excellent level of hygiene never reached over such a period of time.

To read the full article, click here (in French)!

Bus Interior Design – Transbus.org

Antimicrobial film

The French company MetalSkin Technologies has developed MetalSkin, an antimicrobial adhesive film combining polymers and an alloy with 92% copper. This film is to be applied on surfaces in contact with travelers to limit sanitary risks.

The application of this film, combined with periodic disinfection of the bars, reduces the microbial load on these surfaces.

Barres de maintien avec revêtement biocide MetalSkin
Handrails with MetalSkin biocide coating in a Transdev Solaris bus at Roissy CDG (photo: MetalSkin).
This product was tested in October 2021 on the stainless steel bars of a Solaris bus of Transdev at Roissy CDG.

To read the full article, click here (in French)!

MetalSkin joins the “French Anti-Covid Industries Committee”

Aucune description alternative pour cette imageMetalSkin Technologies was present for the meeting organized this morning by Leonidas Kalogeropoulos within the framework of “Entrepreneurs For The Republic”.

We were able to present our innovations certified according to NFS90-700 and their concrete applications. Our work around the #qualite and the commitment for an increased #environmental hygiene did not fail to interest Jean Burkard, deputy cabinet director of the Secretary of State for the social and responsible economy; Pierre Pelouzet, mediator of the companies at the ministry of the economy, and also Mr. Yves JEGO, former minister and deputy, and at the origin of the initiative “Origine France Garantie”.

Thank you for your interest and for listening to us. We hope that this is a first step towards the construction of a virtuous system to fight against the risk of contamination in public places!

#construction #france #entrepreneurs #engagement #hygiene #metalskin #covid #metalskin

More than satisfactory test of MetalSkin biocide in Transdev buses – Autocar & Bus Infos

An experiment conducted on the Roissy airport shuttle buses by UUDS Aero, Transdev and MetalSkin Technologies has demonstrated the effectiveness of the MetalSkin biocide coating on contact points such as handrails and other on-board equipment and coatings. During 21 days, the microbial loads remained at levels below the significance level of 50 and often equal to 0. Nine contact surfaces were equipped with MetalSkin, with disinfection occurring every 3 days. Measurements were taken periodically for 21 days. According to UUDS Aero and Transdev, “between 2 disinfections, the equipped elements presented an excellent level of hygiene never reached over such a period of time”.

New Fire/Smoke Certification in Transportation!

Aucune description alternative pour cette imageOur virucidal and bactericidal surfaces have obtained the maximum level of HL3-R1 certification in terms of fire/smoke safety in transport (EN45545 standard)
This adds a new mark of excellence to #metalskin and #mssticker in addition to the NF S90-700 compliance on bactericidal surfaces.

Meeting global safety requirements in real life conditions is what MetalSkin Technologies is now offering to industry leaders!

SNCF Transdev UUDS AERO #transportation #sncf #transdev #uuds #security #safety #quality #efficacy #standards #antimicrobial #fireresistance

Kaufman & Broad has decided to protect its employees!

Kaufman & Broad x MetalSkin® x MS-Sticker®Kaufman & Broad decided to protect its teams by equipping its headquarters with our biocidal solutions that eradicate 99.96% of bacteria and inhibit 99.5% of SARS-CoV-2 :

– MetalSkin® → coating for door handles because it’s enough to open doors with your foot or elbow!
– MS-Sticker® → adhesive film for stair railings and toilet flushes in particular.

Thanks to Lionel SENAN for having selected the only bactericidal and virucidal solution that complies with NF S90-700, the only standard that guarantees its effectiveness in real conditions (unlike solutions evaluated according to ISO 22196 or JIS Z 2801)!

We also thank Mathieu BRODI and his teams for the quick installation of our products and their professionalism.

→ ON YOUR TURN, contact us to equip your offices so that your employees feel safe.

#KaufmanandBroad #health #metalskin #hygiene #antibacterial #antimicrobial #virus #innovation #nfs90700

MetalSkin do Brasil is born!

Aucune description alternative pour cette imageMetalSkin do Brasil is born. We created a company there to expand our efforts to promote our biocidal technology #metalskin, together with our partner Luhan Soriano Vaz. We have had many meetings among which our visit to the Brazilian Presidency palace. This meeting went beyond our expectations and we met interest, enthusiasm, and strong commitment to promote innovation to benefit the people. A good example are the SUS (Universal Health Service) where we proposed to implement MetalSkin® to improve hygiene. This is kind of different than the general reluctance, un-necessary doubts and administrative dead-ends we often face in France and Europe. Brazil is moving forward, Brazil is dynamic, and Brazil is pragmatic! One can observe this also at the private level where firms like Ambipar Group showed great interest in our innovation on the basis of the effective results we were able to give.

Clean Hospitals Digital Days

2021 Digitals Days - Clean HospitalsWe will be at Clean Hospitals Digital Days on 7/12/2021. Join us to learn about the state of the art in terms of environmental hygiene and how we are developing the disruptive innovation that is #metalskin

#hygiene #healthcare #sustainable #metalskin

New Partner : LIMA Adhésifs

Aucune description alternative pour cette imageLIMA Adhésifs, specialist in adhesive for more than 40 years, becomes our new MS-Sticker® distributor ! Do not hesitate to contact them if you wish to protect your premises with our bactericidal and virucidal adhesive film.

We are happy to collaborate with actors who promote innovative and qualitative solutions. 💡

#mssticker #partner #limaadhesive #covid19 #hygiene #health #metalskin #adhesif